Moesture has gotten innew showerlower grout joints on walls and wont dry out can someone help? - custom size shower pan
Create a new tileshower waited almost a month before I used it once with the smaller 18 "joints used to be the worst thing in a new window with tile and marble pillars threshold 1 piece dry no water in the wall, but the wall plumbing not share the problem of 2-8 "in a week after the shower, I realized that the problem seems to be now the grout mold or get something that I noticed in many showers and not this issue before the stone is larger than 1 / 2 "Backer Board durarock with floor and wall putty adhesive drypacked shower pan is a custom blend of soil and the wall of mud, which I've used w / A PVC coating, ranging from 10 to 12 "on walls and around the PT 2x4 Triple Stacked slowdown wraw PED / durarock w / a 6x60x.75 "marble wall tile 8x10" floor is 2x2 "is porclein all standard sizes 1 / 4" w / sand slurry seal me, but a similar shower before 2 years w / no problems with jimmymon1 @ yahoo.c
Wednesday, February 17, 2010
Custom Size Shower Pan Moesture Has Gotten Innew Showerlower Grout Joints On Walls And Wont Dry Out Can Someone Help?
Subscribe to:
Post Comments (Atom)
4 comments:
Sounds like the holes mourn for me. It is likely that immediately remove the tiles around the drain and clean the drain holes. He tries to keep the basis of the shower and wet the walls, it absorbs moisture. Also, you are sure that you often enough down in the shower, soil, water the river channel? You can in a small space heater in the bathroom and closed the door to create a few more days to speed up the drying process. It takes at least two weeks to dry completely. After all the repairs and tile and grout is dry, be sure to seal the joints and grout.
I think it may be another problem. Is it possible that a small leak in the pipe? If you think this could durarock water drips slowly behind the mixer and keep the lower parts of the durarock wet. This condition may explain more in shape, shower wall.The has a flange around the top edge, sitting on the durarock and when the water runs down the wall run to the shower flange. Search for new water sitting in the grout in the shower peak. Dry them and see if the water seems again later.
Let me say first of all, a 1 / 4 "set is a great discrepancy in the shower wall. Shall I say clean the grout and seal joints.
Done well in ensuring that it seems you have a good job.
Secound, however, that comes to mind is that the movement of air in the shower is such that it prevents moisture from the shower to long term.
Is there a fan or a window in the room. So what better than the first part of the problem.
Try to leave the shower door more. Use a small fan, to see if the problem with the air flow.
It is my assumption that the problem of air flow in its interior.
If you are not the problem of airflow should be used more often these sprays on the tub and detergents.
Use a hair dryer, after which the use of chlorine in the spring.
Post a Comment